Dos and Don'ts of ISI Marking for Foreign Manufacturers

 The ISI mark is undoubtedly the most distinguished product quality certification mark in India. The ISI mark is circulated by the Bureau of Indian Standards (BIS). Over three hundred products require mandatory ISI certification before being traded in India.

BIS Certification

Be it Indian manufacturers or foreigners, both have to comply with the standards and rules set by the BIS to maintain the superior quality of the products. However, there are certain additional rules that foreign manufacturers have to follow to obtain the ISI mark of BIScertification mark.

To help you get an insight into what a foreign manufacturer should follow, here are some dos and don’ts of ISI markings.

Dos

#1 Have an AIR

No matter what type of product a foreign manufacturer is planning to launch in India, they have to appoint an Authorized Indian Representative (AIR) who will take total accountability for the actions of the company. The assigned AIR should be an Indian national and must be an AIR of any other organisation. However, if multiple companies come under a single group, then they all can have a common AIR.

#2 Never Miss Out on Documentation

The Bureau of Indian Standards is strict on documentation. Failing to meet even a single document can result in a delay in issuing certification mark. If a foreign manufacturer wants to obtain this mark quickly, then they should not miss out on any relevant document.

#3 Take Expert Assistance

As BIS only consider their tested products and results, foreign manufacturers have very little to no idea of how BIS works. With that in mind, the probability of taking a wrong step during the process is high. Taking assistance from a BIS consultant in Delhi is the best way for a foreign manufacturer as they can help in every step of the process without taking any wrong steps.

Don’ts

#1 Not Preparing for BIS Testing

BIS conducts a thorough test on the manufacturing unit as well as the final products. However, the testing arrangements should be done by the applicant and not BIS. Being unprepared before the testing can delay the license issuance and ultimately delay the product launch.

#2 Going Solo

BIS has created a separate category for foreign manufacturers called Foreign Manufacturers Certification Scheme. Every product falls under this category except for IT and electronic products. Being a separate scheme, the manufacturer may not have an understanding of the process. Filing the application on your own is a mistake that can be harmful to the certification process. All they have to do is connect with a BIS consultant inDelhi for the best guidance on the FMCS certification.

All these were major dos and don’ts that every foreign manufacturer seeking ISI certification mark should know. If you want in-depth detail about the rules and regulations of FMCS, then you should connect with a BIS certification agent as they can help you in getting all the necessary information.